ECM Technika V Profi PID
| Maker | ECM |
|---|---|
| Boiler | Not listed |
| Brew boiler | Not listed |
| Steam boiler | Not listed |
| Water tank | 3 L |
| Plumb-in | Switchable |
| Voltage (US) | 115V |
| Maker's water filter | Not listed |
What water does this machine require?
ECM publishes one limit our water check uses for this machine. It is quoted in the maker's own words below.
| What | The maker's limit | Where it comes from |
|---|---|---|
| Total hardness | at most 71.4 ppm (our conversion of the maker's 4 °dH) | Written for this model. The maker's words for Total hardness. |
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From ECM's guidance for this model.
Hardness, highest: up to 4 °dH
“You should use water with a hardness of max. 4° dH in order to protect your machine from lime scale damage. When necessary, make use of a water softener in order to reach an adequate hardness level.”
Water filter
“Please note that no water filter may be attached to the water tank adapter in machines with a rotary pump. Only water filter pads, which are placed directly into the water tank, may be used. You may also use water which has previously been filtered.”
Descaling
“A calcified machine may only be descaled by your specialised dealer because a partial disassembly of the boiler and the tubing may be necessary to prevent the system from being blocked by lime residues.”
Plumbed-in water
“To avoid calcification of the machine a water-softener is recommended.”
Water type
“Water tank machines or machines in water tank use: Do not operate the machine with carbonated water, but with soft, potable water.”
Where to buy
No store link yet