Jura ENA 4
| Maker | Jura |
|---|---|
| Boiler | Not listed |
| Brew boiler | Not listed |
| Steam boiler | Not listed |
| Water tank | 1.1 L |
| Plumb-in | Not listed |
| Voltage (US) | 120V |
| Maker's water filter | CLEARYL Smart / Smart mini |
What water does this machine require?
Jura hasn't published a limit our check can use for this machine yet, so the check can't give it a result. Whatever the maker does say is quoted below.
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From Jura's guidance for this model.
Hardness setting: 1–30 °dH
“The number of symbols that are brightly lit up indicates the water hardness level: 1–7 °dH (s), 8–15 °dH (ss), 16-23 °dH (sss) and 24–30 °dH (sss£).”
Hardness setting
“Very soft water <3 <3 < 53.4 None Soft water > 4 > 4 > 71 1 Hard water > 8.4 > 8.4 > 150 2 Very hard water > 14 > 14 > 250 3”
Water type
“Never use mineral or carbonated water. You can use tap water, bottled water, spring water and reverse osmosis water.”
Water filter
“Your ENA no longer has to be descaled if you are using the CLEARYL Smart / Smart mini filter cartridge.”
Where to buy
We may earn a commission when you buy through links on our site. Prices and stock change, so the store's page has the final word. Affiliate disclosure