Lelit MaraX
| Maker | Lelit |
|---|---|
| Boiler | Heat exchanger |
| Brew boiler | Not listed |
| Steam boiler | 1.8 L |
| Water tank | 2.5 L |
| Plumb-in | Not listed |
| Voltage (US) | 120V |
| Maker's water filter | 35 l water softener filter |
What water does this machine require?
Lelit publishes one limit our water check uses for this machine. It is quoted in the maker's own words below.
| What | The maker's limit | Where it comes from |
|---|---|---|
| Chloride | below 30 ppm | Written for this model. The maker's words for Chloride. |
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From Lelit's guidance for this model.
Water filter
“To prevent limestone deposits and grant a better result in the cup, use the water resin filter (H).”
Water filter
“The resin filter must be replaced every 14 complete fillings, or after 4 months of use.”
Chloride: up to 30 ppm
“Please check the Chloride level of the water in the tank. The level should be lower than 30 ppm. If it is higher, please contact your reseller.”
Water filter
“The LELIT water softener filters are composed of sodium-based cationic resins. These filters placed inside the tank filter the water and capture the calcium and magnesium salts which would normally precipitate and form scale deposits in the espresso machine circuit. Once captured, these salts liberate sodium salts.”
Where to buy
We may earn a commission when you buy through links on our site. Prices and stock change, so the store's page has the final word. Affiliate disclosure