Philips 3300 Series LatteGo
| Maker | Philips |
|---|---|
| Boiler | Not listed |
| Brew boiler | Not listed |
| Steam boiler | Not listed |
| Water tank | 1.8 L |
| Plumb-in | Not listed |
| Voltage (US) | 120V |
| Maker's water filter | AquaClean filter included |
What water does this machine require?
Philips hasn't published a limit our check can use for this machine yet, so the check can't give it a result. Whatever the maker does say is quoted below.
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From Philips's guidance for this model.
Hardness setting
“We advise you to adjust the water hardness to the water hardness in your region for optimal performance and a longer lifetime of the machine.”
Hardness setting
“The default water hardness setting is 4: hard water.”
Hardness setting
“4 red dots >21 dh 3 red dots >14 dh 2 red dots >7 dh 4 3 2 1 1 red dot or 4 green dots <6 dh”
Water filter
“You can place the AquaClean water filter in the water tank to preserve the taste of your coffee.”
Water filter
“It also diminishes the need for descaling by reducing limescale build-up in your machine.”
Descaler
“Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and not dissolve the limescale properly.”
Where to buy
We may earn a commission when you buy through links on our site. Prices and stock change, so the store's page has the final word. Affiliate disclosure