Profitec Pro 300
| Maker | Profitec |
|---|---|
| Boiler | Dual boiler |
| Brew boiler | 0.3 L |
| Steam boiler | 0.75 L |
| Water tank | 2.8 L |
| Plumb-in | Not listed |
| Voltage (US) | 115V |
| Maker's water filter | Not listed |
What water does this machine require?
Profitec publishes one limit our water check uses for this machine. It is quoted in the maker's own words below.
| What | The maker's limit | Where it comes from |
|---|---|---|
| Total hardness | at most 71.4 ppm (our conversion of the maker's 4 °dH) | Written for this model. The maker's words for Total hardness. |
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From Profitec's guidance for this model.
Hardness, highest: up to 4 °dH
“You should use water with a hardness of max. 4° dH in order to protect your machine from lime scale damage. When necessary, make use of a water softener in order to reach an adequate hardness level.”
Descaling
“An already calcified machine may only be descaled by your specialised dealer because a partial disassembly of the boiler and the tubing will be necessary to prevent the system from being blocked by lime residues.”
Water type
“Do not operate the machine with carbonated water, but with soft, potable water.”
Where to buy
- Whole Latte LoveCheck price at Whole Latte Love (opens in a new tab)
We may earn a commission when you buy through links on our site. Prices and stock change, so the store's page has the final word. Affiliate disclosure