Profitec Pro 800
| Maker | Profitec |
|---|---|
| Boiler | Lever, single boiler |
| Brew boiler | Not listed |
| Steam boiler | 3.5 L |
| Water tank | 2.8 L |
| Plumb-in | Switchable |
| Voltage (US) | 115V |
| Maker's water filter | Water filter pads (in the tank) |
What water does this machine require?
Profitec publishes one limit our water check uses for this machine. It is quoted in the maker's own words below.
| What | The maker's limit | Where it comes from |
|---|---|---|
| Total hardness | at most 71.4 ppm (our conversion of the maker's 4 °dH) | Written for this model. The maker's words for Total hardness. |
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From Profitec's guidance for this model.
Hardness, highest: up to 4 °dH
“You should use water with a hardness of 4°dH in order to protect your machine from lime scale damage.”
Hardness, highest: up to 4 °dH
“Zum Schutz der Maschine vor Kalkschäden sollte Wasser mit einer Härte von max. 4° dH verwendet werden.”
Water filter
“To prevent lime scale damage, you can insert our water filter pads directly into the water tank.”
Descaling
“If these measures are insufficient, a prophylactic descaling of the machine may be required. If you operate your machine with direct water connection, contact your specialised dealer before undertaking this measure.”
Plumbed-in water
“To avoid calcification of the machine, a water filter is recommended.”
Where to buy
- Clive CoffeeCheck price at Clive Coffee (opens in a new tab)
We may earn a commission when you buy through links on our site. Prices and stock change, so the store's page has the final word. Affiliate disclosure