Quick Mill Anita Evo
| Maker | Quick Mill |
|---|---|
| Boiler | Heat exchanger |
| Brew boiler | Not listed |
| Steam boiler | 1.6 L |
| Water tank | 3 L |
| Plumb-in | Not listed |
| Voltage (US) | Not listed |
| Maker's water filter | Not listed |
What water does this machine require?
Quick Mill publishes one limit our water check uses for this machine. It is quoted in the maker's own words below.
| What | The maker's limit | Where it comes from |
|---|---|---|
| Total hardness | at most 3 gpg (51.4 mg/L as CaCO3, our conversion) | Written for this model. The maker's words for Total hardness. |
Will my water work with this machine?
Add your water from a test strip, a report or your city's numbers, and we'll check it against the maker's limits above. It stays in this browser.
The maker's water guidance
From Quick Mill's guidance for this model.
Total hardness: up to 3 gpg
“Three grains/50 ppm or less of hardness is acceptable to be used in the machine. • Note: Should your water’s hardness level exceed three grains/50 ppm, then it is strongly recommended that an in tank softener be used or a different source of water that has been tested for hardness. Some bottled water can be extremely hard and should always be tested before using. Using a Brita or PUR style pitcher or faucet filter does NOT remove any hardness from the water and should only be used in the machine if your water source is under 3 grains of hardness. Using hard water in the machine will affect its performance and may cause damage to the machine which is not covered under warranty.”
Where to buy
- Chris' CoffeeCheck price at Chris' Coffee (opens in a new tab)
We may earn a commission when you buy through links on our site. Prices and stock change, so the store's page has the final word. Affiliate disclosure